红外感应自动移动门设计与实现-毕业设计要点分析.doc

分类号：TP273 U D C：D10621-408-(2015) 1547-0 密 级：公 开 编 号：2011073014 红外感应自动移动门 设计与实现 论文作者姓名： XXX 申请学位专业： 自动化(工业) 申请学位类别： 工学学士 指导教师姓名（职称）： XXX（讲师） 论文提交日期： 2015年06月06日 分类号：U D C：D10621-(2015)1547-0 密 级：公 开编 号： 红外感应自动移动门设计与实现 论文作者姓名： XXX 申请学位专业： 自动化（工业） 申请学位类别： 工学学士 指导教师姓名（职称）： XXX（讲师） 论文提交日期： 2015年06月10日 红外感应自动移动门设计与实现 摘 要 关键词： Design and implementation of automatic moving door for infrared sensor Abstract With the continuous development of science and technology, people constantly pursue the living conditions, and the automatic door of this high-tech products came into being.Automatic doors have been widely used in peoples daily life, but at the same time, the safety and performance requirements of the automatic doors are also higher and higher.Because of the adaptability of SCM system and high stability, the design uses AT89C51 microcontroller as the main controller. The design of infrared induction automatic mobile portal design and implementation, using infrared sensors as sensor, the detection of radiation to the human body infrared energy change, the conversion of voltage signal, transmitted to the single chip microcomputer, stepping motor as a power device.?Control the rotation of the stepper motor through the microcontroller, so that the door automatically opens, when the door can automatically shut the door. This paper is mainly to achieve infrared detection and control system based on AT89C51 single chip microcomputer. Its advantage is that the hardware circuit is simple, the software function is perfect, the control system is reliable, the performance to price ratio higher characteristic, with certain use and reference value. Key words: Automatic Door Single chip microcomputer Infrared sensor Stepper motor 目 录 论文总页数：29页 1 引言 1 1.1 课题背景 1 1.2 自动门发展历史与现状 1 1.3 课题研究的意义和目的 1 2 系统方案 2 2.1 系统总体规划 2 2.2 器件介绍 3 2.2.1 单片机 3 2.2.2 人体感应模块 6 2.2.3 ULN2003芯片 7 2.2.4 步进