平钟高速公路木隧道主题结构与施工方案设计.doc

平钟高速公路木隧道主题结构与施工方案设计.doc

  1. 1、本文档共92页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
平钟高速公路木隧道主题结构与施工方案设计

摘 要 该设计运用所学的知识完成木冲隧道左线的设计与施工。木冲隧道左线长1825m所经地区为典型的喀斯特地貌,地层为以砂岩、页岩、粉砂岩为主的寒武系地层。 首先依据工程要求和设计规范确定隧道断面,然后根据“荷载-结构”法通过ANSYS对结构进行强度检算,根据检算结果配筋。隧道围岩等级主要以Ⅱ级、Ⅲ级、Ⅳ级和Ⅴ级为主。Ⅱ级和Ⅲ级围岩比较稳定设计采用全断面开挖,Ⅴ级和Ⅳ级围岩,由于围岩情况差,开挖断面较大设计采用中侧壁导坑法。隧道的主要施工方法:隧道采用新奥法施工,以喷射混凝土锚杆作为主要的支护手段,通过检测控制围岩变形,充分发挥围岩的自承能力。通过对围岩的力学形态以及支护结构的工作状态的监控量测来评价设计施工水平并及时的改进与调整。隧道采用管棚作为超前支护,初期支护采用超前或径向注浆锚杆(小导管)、型钢钢架、钢格栅及挂网湿喷等施工技术,当围岩与初期支护基本稳定后施做二次衬砌 关键词: 高速公路 隧道 结构设计 施工 新奥法 Abstract The design complete the left hand lane tunnel red wood design and construction .The length of the left line of Mu Chong Tunnel is1825 meter, it crosses karst areas, Formation is mainly made of sandstone, shale and siltstone Cambrian strata. First of all, based on engineering requirements and design specifications to determine the tunnel section, And then under the "load - the structure " law of the structure through the ANSYS calculation of strength, according to the results of reinforcement calculation. The main tunnel level to grade Ⅱ, Ⅲ level, Ⅳ and Ⅴ grade class-based. Grade Ⅱ and Ⅲ level design is more stable rock so use full-face excavation, Level and grade Ⅳ Ⅴ rock, rock the situation as a result of poor design of the excavation cross-section using a larger hole in the wall guide method. NATM is the main tunnel construction methods. NATM is the construction method that Shotcrete Anchor is the main means of support by detecting the deformation.By the monitoring of mechanical form of rock and Supporting the work of state structures evaluate the level of design and construction of improvements in a timely manner with the adjustment Lead pipe roof supports the tunnel.The early Support adopts advanced or radial grouting bolt linked network of steel gratings and construction technology, such as wet-spray. When the rock and the initial support facilities achieve stability then secondary lining Keywords: Expressway Tunnel Design of lining structure Construction NATM 目录 第1章 绪论 1 1.1 课题研究背景 1 1.2 国内公路隧道发展状况 1 1.3

您可能关注的文档

文档评论(0)

yaoyaoba + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档