catia基础学习手册3.pptVIP

* MOUSE MANIPULATION 23 The 3 button mouse is your tool for manipulation of the parts and assemblies that you have created. With it you can ZOOM, ROTATE and PAN your parts or manipulate the specification tree. First, place your cursor ANYWHERE on the screen… To ZOOM, click and hold the MIDDLE mouse button, click and release the LEFT mouse button, then PUSH the mouse away from you to make your part smaller and PULL it towards you to enlarge your part. CLICK AND HOLD CLICK AND RERLEASE 24 ZOOM in from a small part… To a LARGE part with this simple technique. 25 The next thing you can do is ROTATE your part… This is accomplished by HOLDING the MIDDLE mouse button and then the LEFT mouse button while keeping the middle one depressed. CLICK AND HOLD FIRST CLICK AND HOLD SECOND 26 You can ROTATE your part in any orientation, 360 degrees in 3D. Click the middle mouse button on the section of part you want centered on the screen to change the rotational axis. 27 Another useful mouse aided motion is PANNING… To PAN a part across the screen, click and hold the MIDDLE mouse button only. This allows you to move your part around the screen in a single orientation. CLICK AND HOLD 28 Your part will remain the same size and in the same orientation, but you can move it around in relation to the screen itself. 29 The SPECIFICATION TREE can also be manipulated. You can EXPAND and SHRINK, MOVE and ZOOM it. Note the HAND cursor on the tree. To manipulate the tree, you must first click on it. This will turn your part DARK, signaling you are ready to perform various tree functions. HAND 30 The tree responds the same as a part does for manipulation. To move the tree, simply place the cursor near it and click and hold the middle mouse button. Now drag the tree wherever you wanted it. Here we have moved the tree by dragging it from one corner of the screen to the other. FROM HERE… TO HERE… 31 By using the same mouse clicks to ZOOM as you did with a part, you can make your tree larger or