本科毕业设计__集中供热热水网路设计供热外网.docVIP

本科学生毕业 太原某师范学院集中供热热水网路设计 院系名称： 土木与建筑工程学院 专业班级： 建环11-1班 学生姓名： ××× 指导教师： ××× 职 称： 副教授 黑 龙 江 工 程 学 院 二一年六月  The Graduation Design for Bachelors Degree The Design of Central Heating and hot water network in a Normal University in Taiyuan Department：School of Civil and Architectural Engineering Specialty：Architectural Environment and Equipment Engineering Class：11-1 Candidate：××× Advisor：××× Academic title：Associate Professor Heilongjiang Institute of Technology 2015-06·Harbin 伴随科技的飞速发展和人们对生活舒适意识的不断改变，我们建筑环境与设备工程专业面临的挑战也在升高。绿色环保节能的化智能化舒适性建环的发展方向。当然决定上层建筑，实现更高的水平就应该从基础开始。相对于以前的分散式供热系统是热源、热网、热用户三部分组成本设计太原某师范学院集中热热水设计。设计内容由这三个部分展开。一级网为市政供水二级网为站热网一级网为管沟枝状形式；二级网为直埋枝状形式。热用户以学校宿舍、办公室、实验室等，且为中低层建筑。 以后角度出发特殊充分做到“”。 关键词：热负荷；；水力计算；；；；Mathcad Abstract With the rapid development of science and technology and the changing of peoples life comfort consciousness, the challenge of building environment and equipment engineering is also increasing. In the green energy saving and energy saving, the humanity and the intelligent comfort living environment is becoming the new direction of the HVAC development. Of course, the lower base determines the superstructure, the higher level should start from the basic content. Centralized heating system has the advantages of large heat capacity, high heat efficiency, saving labor force and covers an area of small, etc. compared with the previous decentralized heating system, become the current rapid development of domestic urban heating mode, is recognized as the central heating system is heating heating net, customers, and is composed of three parts. The design of the central heating and hot water network design for a normal university in Taiyuan. So the design content is started by the three parts. Heat source: the first grade net is the municipal water supply; the two grade net is the thermal station. Heat n