Ansys_12.0_CFX_官方教程__2.pptVIP

* CFX-Solver Manager Solution Monitors Monitor the convergence of the solver Plot residuals, imbalances, monitor points, forces, fluxes… Text output from the Solver Lots of info in here Can also view the .out file in a text editor Workspace Create new monitors CFD-Post CFX-Pre CFX-Solver CFX-Solver Manager When the Solver finishes, start CFD-Post: When running in Workbench: Just close the Solver Manager Check mark shown next to Solution Right-click on Results and select Edit to start CFD-Post When running standalone: Enable Post-Process Results on the solver finished notification window Or select the Post-Process Results icon from the toolbar Right-click to start CFD-Post CFD-Post CFX-Pre CFX-Solver Outline Tree Viewer Window Details Pane CFD-Post CFX-Pre CFX-Solver CFD-Post Workspace Outline tree displays all post-processing objects. Right-click or double-click to edit in the Details Pane Editor Tabs Outline Variables Expressions Calculators Turbo General Workflow Prepare locations where data will be extracted from or plots generated E.g. Planes, Isosurface Create variables/expressions which will be used to extract data (if necessary) E.g. drag, pressure ratio i) Generate qualitative data at locationsii) Generate quantitative data at locations Generate Reports CFD-Post CFD-Post CFX-Pre CFX-Solver CFD-Post CFD-Post CFX-Pre CFX-Solver Create Locations Variables / Expressions Qualitative and Quantitative data Reports Use the Location drop-down menu in the toolbar to create locations inside the domain 2D 3D domain, boundary and mesh regions are automatically available Discussed in the Post-processing lecture along with more details on creating locations Summary of Common File Types CFX-Solver CFX-Pre CFD-Post .def (Solver Input or Definition File) .cfx (CFX-Pre Database) .wbpj (Workbench Project File) .out (Solver Output File) .res (Results File) .cst (CFD-Post State File).cse (CFD-Post Session File) .def, .cmdb (Mesh Files) Import