Coeffcient of thermal conductivity.docVIP

Coefficient of thermal conductivity is one of the most important performance indexes of thermal insulation materials. For homogeneous and isotropic objects, under the condition of steady one-dimensional heat flow, the coefficient of thermal conductivity is both sides by temperature difference is 1 c in 1 seconds, thickness is 1 m, 1 square meters of surface area for the heat flow of the object. (3) the thermal insulation material in the average temperature of 70 degrees Celsius heat conduction coefficient should not be greater than 0.08 joules per kelvin per meter, and in the use of density and temperature range under the thermal conductivity of the equations and charts. With garment when he becomes surety for a cold material coefficient of thermal conductivity of foam plastics and its products 25 degrees centigrade shall be no greater than 0.044 watts per kelvin per meter. The coefficient of thermal conductivity of foam rubber products 0 degrees centigrade shall be no greater than 0.036 watts per kelvin per meter. 1 the coefficient of thermal conductivity of foam glass products 25 degrees Celsius when should be no greater than 0.045 watts per kelvin per meter, 2 kinds of foam glass products when 25 degrees Celsius, the coefficient of thermal conductivity should not greater than 0.064 watts per kelvin per meter. 2. The material of water absorption, moisture absorption rate and moisture content (1) water absorption said materials to the water absorption ability, moisture absorption rate is material from the environments capacity to absorb water vapor in the air, the moisture content is the performance of the material to absorb foreign water or moisture. (2) the moisture content of material coefficient of thermal conductivity of materials, mechanical strength, density. After adsorption moisture of materials in the material porosity was occupied by water corresponding air position, to absorb a lot of heat, and water evaporation in the coefficient of thermal conduct