基础工程设计原理201020112浅基础(三).pptVIP

魏焕卫两种途径进行调整以满足承载力要求 调整基础长宽比l/b 一般取l/b=1.0~2.0 调整基础面积A l b Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （5）重新确定基础尺寸-增大基底面积 一般取l/b=1.0~2.0，这里取1.2 取b=2.1m l=2.5m 将按轴心荷载得到的面积增加10~40% 例：P65第2-5题 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （6）承载力特征值宽度修正-增大基底面积 因此无需进行宽度修正 例：P65第2-5题 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （7）承载力验算-增大基底面积 例：P65第2-5题 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （7）承载力验算-增大基底面积 例：P65第2-5题 因此，独立基础宽度取2.1m，长度取2.5m满足承载力要求 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 两种途径进行调整以满足承载力要求 调整基础长宽比l/b 一般取l/b=1.0~2.0 调整基础面积A l b Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （5）重新确定基础尺寸-调整基础长宽比 一般取l/b=1.0~2.0，这里取2 取b=1.5m l=3.0m 将按轴心荷载得到的面积增加10~40% 例：P65第2-5题 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （6）承载力特征值宽度修正-调整基础长宽比 因此无需进行宽度修正 例：P65第2-5题 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （7）承载力验算-调整基础长宽比 例：P65第2-5题 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （7）承载力验算-调整基础长宽比 例：P65第2-5题 还不满足要求！ Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 解： （7）承载力验算-调整基础长宽比-稍微增加基底面积 例：P65第2-5题 因此，独立基础宽度取1.6m，长度取3.0m满足承载力要求 Evaluation only. Created with Aspose.Slides for .NET 3.5 Client Profile 5.2.0.0. Copyright 2004-2011 Aspose Pty Ltd. 两种调整途径效果比较 调整基础面积A 调整基础长宽比 一般取l/b=1.0~2.0 Evaluation only. Created with Aspose.Slid