GEI41042n_ComprCleanNonDLN_图文.doc

GEI41042n_ComprCleanNonDLN_图文 导读：就爱阅读网友为您分享以下“GEI41042n_ComprCleanNonDLN_图文”的资讯，希望对您有所帮助，感谢您对92的支持! GEI 41042N I.SCOPEGas Turbine Compressor Cleaning The scope of this document is to present the methods of compressor cleaning offered by GE. The two typesof cleaning are liquid and solid compound cleaning. Two methods of liquid cleaning are employed — on lineand off line. On-line cleaning is the process of injecting cleaning solution into the compressor while runningat full speed and some percentage of load. Off-line cleaning is the process of injecting cleaning solution intothe compressor while it is being turned at cranking speed. The advantage of on-line cleaning is that washingcan be done without having to shut down the machine. On-line washing, however, is not as effective as off-linewashing; therefore, on-line washing is used to supplement off-line washing, not replace it. The second type of cleaning is solid-compound cleaning. Solid-compound cleaning is done at full speed andreduced load. Most deposits can be removed with liquid cleaning, but for those that cannot, solid-compoundcleaning may be necessary. It is to be noted that some blade surface deterioration may be attributed to solid-compound cleaning. Both types of cleaning will be discussed further in this document. This document applies to all heavy duty gas turbine models offered by Gas Turbine Division, which do nothave Dry Low Nox combustion systems. Refer to GEK 103623 for liquid washing recommendations for thoseunits. II.INTRODUCTION A loss of gas turbi