VLAN基础命令..docVIP

进入系统视图?system-view? ? 第1章??? VLAN配置命令1.1? 1.1? VLAN配置命令1.1.1? description text【命令】description textundo description【视图】VLAN视图、VLAN接口视图【参数】text：描述VLAN或VLAN接口的字符串，可以包含特殊字符及空格，区分大小写。l?l????????????? VLAN的描述字符串：长度范围为1～32个字符。??l????????????? VLAN接口的描述字符串：长度范围为1～80个字符。【描述】description命令用来设置当前VLAN或VLAN接口的描述字符串。undo description命令用来恢复当前VLAN或VLAN接口的描述字符串为缺省值。缺省情况下，VLAN的描述字符串为该VLAN的VLAN ID，例如“VLAN 0001”；VLAN接口的描述字符串为该VLAN接口的接口名，例如“Vlan-interface1 Interface”。相关配置可参考命令display vlan，display interface Vlan-interface。【举例】# 为VLAN1指定一个描述字符串“RESEARCH”。H3C system-viewSystem View: return to User View with Ctrl+Z.[H3C] vlan 1[H3C-vlan1] description RESEARCH1.1.2? display interface Vlan-interface【命令】display interface Vlan-interface [ vlan-id ]【视图】任意视图【参数】vlan-id：指定VLAN接口的编号。【描述】display interface Vlan-interface命令用来显示VLAN接口的一些相关信息。如果指定了vlan-id，显示指定VLAN接口的相关信息；如果不指定vlan-id，则显示所有已创建的VLAN接口的相关信息。相关配置可参考命令interface Vlan-interface。【举例】# 显示接口Vlan-interface1的相关信息。H3C display interface Vlan-interface 1Vlan-interface1 current state : DOWNLine protocol current state : DOWNIP Sending Frames Format is PKTFMT_ETHNT_2, Hardware address is 000f-e20f-4101Internet Address is 10.1.1.1/24 PrimaryDescription : Vlan-interface1 Interface The Maximum Transmit Unit is 1500表1-1 表1-1 display interface Vlan-interface命令显示信息描述表字段?描述?Vlan-interface1 current state?VLAN接口当前状态?Line protocol current state?链路协议当前状态?IP Sending Frames Format?IP发送帧格式?Hardware address?VLAN接口对应的MAC地址?Internet Address?VLAN接口对应的IP地址?Description?VLAN接口描述字符串?The Maximum Transmit Unit?最大传输单元（MTU）??1.1.3? display vlan 【命令】display vlan [ vlan-id [ to vlan-id ] | all | dynamic | static ]【视图】任意视图【参数】vlan-id：指定VLAN ID，取值范围为1～4094。to：指定多个连续的VLAN ID，to之后的VLAN编号不能小于to之前的。all：显示所有VLAN的相关信息。dynamic：显示动态VLAN（指通过GVRP协议注册的VLAN）信息。static：显示静态VLAN（指通过手工配置创建的VLAN）信息。【描述】display vlan命令用来显示VLAN的相关信息。l?l????????????? 如果使用参数vlan-id，??则显示指??定VLAN的相关信息。??l????????????? 如果不??使用参数vlan-id，??则显示系统已存在的VLAN的编号。??l??