DSLJ型电热式胶带硫化器[精].docVIP

DSLJ型电热式胶带硫化器 MODEL DSLJ ELECTROTHERMIC RUBBER BELT VULCANIZER 使用说明书 OPERATING INSTRUCTION MANUAL 一、硫化机的用途 Usage of Vulcanizer DSLJ型电热式胶带硫化机（下称硫化机），体积小、重量轻，普通三相电源供电，热板温度均匀，水压系统供给（0～1.8MPa）均匀压力，配有轻型全自动电控箱。电控箱与主机的连接由一体化插件及多芯电缆完成，操作方便、工作可靠。目前广泛应用于冶金、矿山、电厂、港口、建材、化工等周围无爆炸性气体和足以腐蚀金属的有害性气体场合的帆布、尼龙、钢绳芯运输胶带的现场硫化胶接。亦适用于防腐、耐热等特殊性能胶带的硫化接头。 胶带接头的质量，直接影响到胶带的工作效力、使用寿命，尤其是目前长距离，高强度运输带更为重要。故DSLJ型电热式胶带硫化机是目前胶带运输机械中不可少的辅助设备。 Model DSLJ Electrothermic Rubber Belt Vulcanizer (following is called vulcanizer for short), has the specialities of small volume, light weight, general three-phase power supply, homogeneous temperature of electrothemic plae. Well-distributed pressure {0-1.8Mpa) supplied by a hydiaulic system, equipping of light automatic control panel, connection of the control panel and the main equipment done by the integrated plug with the multicore cable, easy maintenance, realible working etc. It is now used widely for the on-site vulcanizing connection of canvas~ nylon, conveyer with steel cable core inside as well as for the connection of rubber belt with special characteristics of anticorrosion and heat resistant under the circumstance of no explosive gas or any harmful gas to corrode the metal~ which is accepted by the metallurgical engineering, mineral production, power station~ harbor machinery architectural working or chemical industry etc. The quality of the belt connection will influence the working efficiency of the rubber belt or the length of life directly~ especially for the long distance and high-strength conveyer. Therefore, model DSLJ vulcanizer is the necessary accessories for the rubber belt conveyer equipment. 二、 技术参数 Technical Data 1、硫化压力：1.5MPa， 1. Pressure of vul: 1.5MPa 2、硫化温度：145℃， 2. Temp. of vul: 145℃ 3、硫化板表面温差：±3℃， 3. Supface temp. diff. of vul.Plate: ±3℃ 4、升温时间（常温到145℃）：4.Hyperthermic time: ≯50min ≯50min， （mormal temp. is up to 145℃） 5、电源电压：380V、50Hz， 5.Voltage: 380V、50Hz 6、电控箱输