eddiejackson.net（9页）.docVIP

ContentsCreating a custom winpe boot.wim- SCCMCreating a bootable USB DriveCreating a winpe boot.wim with parameter errorsCreating a custom WinPE Boot.wimWhen using System Center Configuration Manager for OS deployment you always use WinPE as your boot media/environment for deploying the actual image… Normally you can just use the boot image supplied with SCCM (a WinPE 3.0 wim, taken from WAIK and placed in \\”SiteServer”\SMS_”SiteCode”\osd\boot\”architecture”\boot.wim), with out any further considerations. Well you might have to inject some NIC and Storage drivers, but that’s it! A problem you might run into though, is lacking functionality of that WinPE build, like no HTA, MDAC/ADO support etc, or you might need to ad a “Custom media hook” to run a script prior to starting the task sequence. If that’s the case you will have to make a custom boot image. Steps1. Use (WAIK) To create a WinPE 3.0 boot image - Go to StartAll ProgramsMicrosoft Windows AIK and start Windows PE Tools Command Prompt - Type COPYPE X86 C:\WinPEx86 (this is for 32bit, for 64bit change x86 to amd64) 2. Mount the boot image to a temporary directory. - imagex.exe /mountrw C:\WinPEx86\winpe.wim 1 C:\WinPEx86\mount 3. Install optional components (Scripting, WMI and XML are required to perform SCCM OS deployments – so they must be installed) -peimg.exe /install=*Scripting* C:\WinPEx86\mount\windows (support for .vbs, .js and .wsf – mandatory for SCCM) -peimg.exe /install=*WMI* C:\WinPEx86\mount\windows (support for WMI – mandatory for SCCM) -peimg.exe /install=*XML* C:\WinPEx86\mount\windows (support for XML – mandatory for SCCM) ________________________________________optional components_________________________________ -peimg.exe /install=*HTA* C:\WinPEx86\mount\windows (support for HTA) -peimg.exe /install=*MDAC* C:\WinPEx86\mount\windows (support for Database access – mandatory if using MDT DB) -peimg.exe /install=*Fonts* C:\WinPEx86\mount\windows (support for ASIA font types) 4. C