facultyofengineering-easternmediterraneanuniversity（6页）.docVIP

Faculty of Engineering ELECTRICAL AND ELECTRONIC ENGINEERING DEPARTMENT EENG223 Circuit Theory I INFE221 – Electrical Circuits Midterm Exam Spring 2009-10 20 April 2010 Duration: 90 minutes Instructor: O. Kukrer Solve all 5 Problems STUDENT’S NUMBER NAME SURNAME GROUP NO. Problem Points 1 20 2 20 3 20 4 20 5 20 TOTAL 100 1. In the circuit of Figure 1, find the current io using nodal analysis. KCL eqn. for node 1: KCL eqn. for node 2: Solving (1) and (2) 2. In the circuit of Figure 2, (a) Find the voltage Vx using mesh analysis. (15 pts) (b) Find the power supplied by the 4-A current source. (10 pts) (a) KVL eqn. for the supermesh: (1) KCL at node C : (b) Voltage across the 4-A current source 3. Use superposition to find the current i0 in the circuit in Figure 3. Apply the 2A-source, turn off the 24V-source: Nodal analysis: KCL eqn. for node 1: KCL eqn. for node 2: Apply the 24V -source, turn off the 2A -source: KCL eqn. for node 2: 4. Use source transformation to find the voltage v0 in the circuit in Figure 4. Transform the dependent voltage source (6v0) in series with the 6? resistance to a current source: Transform the dependent current source (v0) in parallel with the 2? resistance (equivalent of ) to a voltage source: KVL for the loop : 5. Obtain the Thevenin equivalent of the circuit in Figure 5 with respect to the terminals a-b. Since the current is zero (terminals a-b are open)