课件1:IP地址与子网划分讲解.ppt

  1. 1、本文档共105页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
课件1:IP地址与子网划分讲解

在给定30位子网掩码,选出了第1个可用的网络号(),并去掉全1和全0的主机IP地址之后,就剩下下面的地址范围:~。广播地址的所有主机位为1,即17。可以选出其中的一个IP地址,并将它分配给串行链路的一端,另一个IP地址就分配给串行链路的另一端。 接下来,将计算交换机网段所使用的IP地址范围,它包含4个路由器接口。我们给定29位的子网掩码,选出第1个可用的网络地址。在这种情况下,第1个可用的网络是,如下表示。同理可得出其他几个表格。 无类域间路由 (CIDR) RFC 1519 无类域间路由(Classless Interdomain Routing,CIDR)是一种工业标准,用来显示与主机或网络IP地址一起使用的子网位数。假定IP地址为,掩码为,现在不是将IP地址和子网掩码分开来写,而是将它们合在一起。例如,/24就表示32位子网掩码中有24个为1。 下面列出了所有可能的CIDR: 注意,CIDR列表从/0开始,到/32结束。随着RFC 3021的发布,/31可能用在点对点中行链路中了,而不是像以前那样使用/30,这样就可以减少1/2的地址使用量。由于点对点连接中连接两个系统,因此没有理由将一个地址专用于网络地址,再将另一个地址专用于广播地址。/32的地址被分配作为主机路由,它通常分给路由器上的回送接口。 注:RFC 3021为在IPv4点对点连接中使用31位前缀。 综合示例研讨 13台 29台 61台 5台 给定一个C类IP地址:/24,请根据下图完成子网规划,要求: 1、在完成规划的同进尽量节约IP地址; 2、详细写出各子网的地址范围,路由器各端口的IP地址。 E0 E0 E0 E0 S0 S1 S0 S1 S0 S1 Ra Rb Rc Rd IP IP In a TCP/IP environment, end stations communicate seamlessly with servers or other end stations. This communication occurs because each node using the TCP/IP protocol suite has a unique 32-bit logical address. Often traffic is forwarded through the internetwork based on the name of an organization, rather than an individual person or host. If names are used instead of addresses, the names must be translated to the numeric address before the traffic can be delivered. Location of the organization will dictate the path that the data follows through the internetwork. Each company listed on the internetwork is seen as a single network that must be reached before an individual host within that company can be contacted. Each company network has an address; the hosts that populate that network share those same bits, but each host is identified by the uniqueness of the remaining bits. The IP address is 32 bits in length and has two parts: Network number Host number The address format is known as dotted-decimal notation. Example address: 04. Each bit in the octet has a binary weight, such as (128,...4, 2, 1). The minimum value for an octet is 0; it contains all zeros. The maximum value for an octet is 255; it contains all ones. The allocation of a

文档评论(0)

4477704 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档