solaris安装oracleG完整报告.docxVIP

Solaris安装oracle10G报告安装前的准备1、检查包SUNWarc, SUNWbtool, SUNWhea, SUNWlibm, SUNWlibms, SUNWmfrun, SUNWsprot, SUNWtoo, SUNWxwfnt, SUNWi1cs, SUNWi15cs, SUNWi1of, SUNWxcu4, SUNWuiu8 and SUNWulcf - See Note 290034.1检查方法及结果：/bin/pkginfo -l |grep -i SUNWarc /bin/pkginfo -l |grep -i SUNWbtool/bin/pkginfo -l |grep -i SUNWhea /bin/pkginfo -l |grep -i SUNWlibm/bin/pkginfo -l |grep -i SUNWlibms/bin/pkginfo -l |grep -i SUNWmfrun/bin/pkginfo -l |grep -i SUNWsprox/bin/pkginfo -l |grep -i SUNWtoo/bin/pkginfo -l |grep -i SUNWxwfnt/bin/pkginfo -l |grep -i SUNWi1cs缺 /bin/pkginfo -l |grep -i SUNWi15cs缺/bin/pkginfo -l |grep -i SUNWi1of/bin/pkginfo -l |grep -i SUNWxcu4/bin/pkginfo -l |grep -i SUNWuiu8 /bin/pkginfo -l |grep -i SUNWulcf处理方法：利用df –h命令找到最后一个挂接目录如图是：/cdrom/sol_10_509_x86cd 到该目录下就可以用pkgadd进行安装包pkgadd -d ./ SUNWi1cspkgadd -d ./ SUNWi15cs2．检查相应的操作系统补丁根据文档的要求可以在/etc/system文件里设置下面这个参数来解决补丁问题。set pg_contig_disable=13、修改配置参数修改system文件，在后面添加如下内容：root@NOP2-MHDB?#?cd?/etcroot@NOP2-MHDB?#?cp?system?systemoot@NOP2-MHDB?#?vi?system**************oracle?set**********************************set?shmsys:shminfo_shmmax=27917287423set?shmsys:shminfo_shmmin=1set?shmsys:shminfo_shmseg=20set?shmsys:shminfo_shmmni=100set?semsys:seminfo_semmni=100set?semsys:seminfo_semaem=16384set?semsys:seminfo_semmap=66set?semsys:seminfo_semmns=1024set?semsys:seminfo_semmnu=30set?semsys:seminfo_semume=1024set?semsys:seminfo_semvmx=32767set?semsys:seminfo_semmsl=256set?semsys:seminfo_semopm=100set?rlim_fd_cur=256set??noexec_user_stack=1set??noexec_user_stack_log=1***************oracle?set?end*****************************4、检查swap、内存等一般要求是至少1G内存，swap空间要求需要1.5G以上！5．创建用户及目录路径创建用户：groupadd　dbagroupadd　oinstalluseradd　-d　/export/home/oracle　-g　oinstall　-G　dba　–m　oracle切换到oracle用户Cd回车，然后创建一下目录来安装mkdir -p app10/oracle/product/10.2.06．设置环境变量这是需要的环境变量ORACLE_BASE=/export/home/oracle/app10/oracleexport ORACLE_BASEORACLE_HOME=/export/home/oracle/app10/oracle/product/10.2.0export ORACLE_HOME#ORACLE_SID=csyzdbexport ORACLE_SI