solaris添加硬盘实例.docVIP

----------------------------------------------------------#touch /reconfigure #init 0-----------------------------------------------------------# formatSearching for disks...done AVAILABLE DISK SELECTIONS:?????? 0. c0d0 DEFAULT cyl 17728 alt 2 hd 15 sec 63????????? /pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0?????? 1. c0d1 DEFAULT cyl 17751 alt 2 hd 15 sec 63????????? /pci@0,0/pci-ide@7,1/ide@0/cmdk@1,0Specify disk (enter its number): 1selecting c0d1Controller working list found[disk formatted, defect list found] FORMAT MENU:??????? disk?????? - select a disk??????? type?????? - select (define) a disk type??????? partition - select (define) a partition table??????? current??? - describe the current disk??????? format???? - format and analyze the disk??????? fdisk????? - run the fdisk program??????? repair???? - repair a defective sector??????? show?????? - translate a disk address??????? label????? - write label to the disk??????? analyze??? - surface analysis??????? defect???? - defect list management??????? backup???? - search for backup labels??????? verify???? - read and display labels??????? save?????? - save new disk/partition definitions??????? volname??? - set 8-character volume name??????? !cmd???? - execute cmd, then return??????? quitformat fdiskNo fdisk table exists. The default partition for the disk is: a 100% SOLARIS System partition Type y to accept the default partition, otherwise type n to edit thepartition table.yformat labelReady to label disk, continue? y format pattition`pattition is not expected.format partition PARTITION MENU:??????? 0????? - change `0 partition??????? 1????? - change `1 partition??????? 2????? - change `2 partition??????? 3????? - change `3 partition??????? 4????? - change `4 partition??????? 5????? - change `5 partition??????? 6????? - change `6 partition??????? 7????? - change `7 partition??????? select - select a predefined table??????? modify - modify a predefined partition table