Measurements of temperature on LHC thermal models在大型强子对撞机的热模型的温度测量.pptVIP

12/05/00 Measurements of temperature on LHC thermal models Cryogenic Facility for Mucool at Linac MUCOOL – MICE meeting Barry Norris, Engineer, Beams Division/Cryogenic Dept. Email: Norris@fnal.gov Fermilab phone: 630-840-3672 Engineers: Arkadiy Klebaner, Alex Martinez, Christine Darve….Del Allspach from PPD(Hydrogen expertise) Description of Helium and Hydrogen Systems Helium System Layout Review of Test at 20K Future Solenoid Setup Basic Overview of Helium to Hydrogen Heat Exchange Controls and Instrumentation Issues Helium and Hydrogen Safety Issues Approximate Schedule for Completing Facilities Present status Helium Plant Hardware Testing Stability of Helium System at 15-20 Kelvin Operation Hydrogen Loop including Manifold System (SLAC-style) Liquid Hydrogen Absorber system Components: Cryostat Absorber LH2pump Helium/Hydrogen heat exchanger Hydrogen loop piping “Dedicated” Safety PLC for Process Controls and Interlock Mechanisms Pressure drop localisation Liquid Hydrogen Absorber system Heat load from ambient to absorber temperature level MUCOOL/MICE meeting –February 5th to 8th 2002 Cryogenic Dept. Absorber cryo. and safety design Footprint of New Cryogenic Facility Compressor Room Two 400 hp, oil flooded screw compressors… Oil removal skid system Motor control centers for Remote Operation Refrigerator Room Tevatron satellite refrigerator used normally for 5 K operation (to be operated at 15K output) Includes expansion engine9s) for appropriate demand Transfer line connection to Experimental hall which includes 5K, 20K, 80K circuits Helium Plant Hardware (continued) Components Outside of Building LN2 Horizontal dewar for pre-cooling of Heat exhanger and 80K shield needs Helium Gas storage Capability to Purify Helium gas with Mobile purifiers used in Tevatron cryogenics Transfer line and gas headers connecting Refrigerator room and experimental hall Future 5K (Helium) Needs Must Have 5K supply for Superconducting Solenoid magne