上罩塑件注射模设计论文答案.doc

上罩塑件注射模设计 系 别 机械工程系 专 业 班 级 学 号 姓 名 指导教师 负责教师 2016年6月 摘 要 Abstract Process from the product structure,?the specific structure of the mold,?the casting mold system,?mold forming part of the structure,?the top out of the system,cooling system,?the choice of injection molding machines and?related parameters of the check,?there are detailed design.?Through the entire design?process that the mold can achieve the?required pieces of plastic processing technology.Design?of an injection mold to produce?cover?plastic products,?in order to realizethe automation of production.?According to the concrete?structure?on the?cover,the?mold is the?side gate of the single type of?injection mold.?Through the die design that?the die to?the quality and processing requirements?to?the upper cover. Concrete design:?material is ABS;?injection machine?using SZ-200/60.?Core and cavity?are respectively arranged on?the fixed mould fixing?plate and the?movable mould fixing?plate,?cavity?are respectively located in the?cavity plate,?the?flow channel?are arranged at both ends;?cavity plate?surface;?the?guide pin?guide mechanism;?the lower?plastic parts?by the thimble?push?ejector retainer plate?outfrom the core,?plastic?pieces of?upper?pulling?plate?which?emerge?from the core?to realize?demolding?through,?through the lateral?linkage?mould opening mechanism. Keywords:?Cover;Injection mold?；Parting surface；Gating system 目 录 摘 要 1 Abstract 2 目 录 3 1引言 5 2 塑件的材料及结构分析 6 2.1塑件的原材料的分析 6 2.2塑件的结构和尺寸精度及表面质量分析 8 2.2.1结构分析 8 2.2.2尺寸精度分析 8 2.2.3表面质量分析 8 2.2.4计算塑件的体积和重量 9 2.2.5塑件注射工艺参数的确定 9 3 注射模的结构设计 10 3.1型腔数目的确定 10 3.2型腔的分布 10 3.3分型面的设计 11 3.4浇注系统设计 11 3.4.1主流道 12 3.4.2分流道设计 12 3.4.3浇口形式及位置的选择 13 3.4.4 剪切速率的校核 14 3.4.5 主流道剪切速率校核 14 3.4.6 浇口剪切速率的校核 14 3.5成型零件结构设计 14 3.5.1型腔的结构设计 14 3.5.2型芯的结构设计 15 4. 模具设计的有关计算 17 4.1型腔和型芯工作尺寸计算 17 4.2 型腔侧壁厚度计算 17 4.3 模具加热和冷却系统的计算 18 4.3.1 塑料熔体释放的热量 18 4.3.2 高温喷嘴向模具的接触传热 19 4.3.3 注射模通过自然冷却传导走的热量 19 4.4模具闭合高度的确定 21 4.5注射机有关参数的校核 21 4.5.1