《电磁场分析软件》实验指导书六(RMxprt相感应电机性能分析).docVIP

RMxprt 电机性能分析上机实验指导书 1月3日 问题描述 建模分析YZD132-8三相感应电机的性能； 上机实验用时预计60分钟。 GENERAL DATA 通用数据 给定输出功率(kW) Given Output Power (kW): 3.7 额定电压(V) Rated Voltage (V): 380 绕组连接 Winding Connection: Delta（三角形连接） Number of Poles: 8 给定转速(rpm) Given Speed (rpm): 700 频率(Hz) Frequency (Hz): 50 杂散损耗(W) Stray Loss (W): 37 摩擦损耗(W) Frictional Loss (W): 34.5333 风阻损耗(W) Windage Loss (W): 0 Operation Mode: Motor 负载类型 Type of Load: Constant Power（恒功率） Operating Temperature (C): 75 STATOR DATA 定子参数 定子槽数 Number of Stator Slots: 48 定子外径(mm) Outer Diameter of Stator (mm): 210 定子内径(mm) Inner Diameter of Stator (mm): 148 定子槽类型 Type of Stator Slot: 2 定子槽 Stator Slot hs0 (mm): 0.8 hs1 (mm): 1.05 hs2 (mm): 12.9 bs0 (mm): 2.8 bs1 (mm): 4.9 bs2 (mm): 6.7 定子铁芯长度(mm) Length of Stator Core (mm): 250 定子铁芯的叠压系数 Stacking Factor of Stator Core: 0.92 硅钢片类型 Type of Steel: M19_24G 冲片分瓣数 Number of lamination sectors 1 压板厚度(mm) Press board thickness (mm): 5 压板是否导磁 Magnetic press board: Yes 线圈类型 Type of Coils: 10 线圈节距 Coil Pitch: 7 每槽导体数 Number of Conductors per Slot: 30 导体的并绕根数 Number of Wires per Conductor: 2 导线线径(mm) Wire Diameter (mm): 0.93 导线绝缘厚度(mm) Wire Wrap Thickness (mm): 0.09 极限槽满率(%) Limited Slot Fill Factor (%): 80 导线电阻率 Wire Resistivity (ohm.mm^2/m): 0.0217 导线长度调整量(mm) Conductor Length Adjustment (mm): 0 端部长度修正系数 End Length Correction Factor: 1 端部漏电抗校正系数 End Leakage Reactance Correction Factor: 1 ROTOR DATA 转子参数 转子槽数 Number of Rotor Slots: 44 转子内径 Inner Diameter of Rotor (mm): 48 转子槽类型 Type of Rotor Slot: 2 转子槽 Rotor Slot hs0 (mm): 0.5 hs1 (mm): 1.2 hs2 (mm): 12 bs0 (mm): 1 bs1 (mm): 5.2 bs2 (mm): 3.5 是否铸铝转子 Cast Rotor: No 是否是半槽 Half Slot: No 转子长度 Length of Rotor (mm): 250 转子铁芯叠压系数 Stacking Factor of Rotor Core: 0.92 转子硅钢片类型 Type of Steel: