oracle 10g rac 10.2.0.3补丁安装(完).pdfVIP

oracle 10g rac 补丁安装(完).txt rac环境:基于 /technology/pub/articles/chan‐ubl‐vmware.html 文档进行的环境配置. 注：升级参照补丁的README进行的 一、Download and Extract the Installation Software 1. Download the p5337014_10203_LINUX.zip patch set installation archive to a directory that is not the Oracle home directory or under the Oracle home directory. 2. Enter the following command to unzip and extract the installation files: $ unzip p5337014_10203_LINUX.zip 二、Set the ORACLE_HOME and ORACLE_SID Environment Variables Enter the following commands to set the ORACLE_HOME and ORACLE_SID environment variables: （已经配置，可略） In these examples, Oracle_home is the Oracle home directory where the Oracle Database 10g installation that you want to upgrade is installed, and sid is the system identifier of the database that you want to upgrade. For Oracle RAC installations, sid is generally the sid prefix and the instance number. For example, devdb1. 三、Stopping All Processes for an Oracle RAC Installation 1、Shut down the following Oracle Database 10g processes before installing the patch set: A、Shut down all processes in the Oracle home on each node that might be accessing a database, for example Oracle Enterprise Manager Database Control or iSQL*Plus: $ emctl stop dbconsole $ isqlplusctl stop 页 1/6 oracle 10g rac 补丁安装(完).txt B、Shut down all services in the Oracle home on each node that might be accessing a database: $ srvctl stop service ‐d db_name [‐s service_name_list [‐i inst_name]] C、Shut down all Oracle RAC instances on the nodes, which run from the Oracle home on which you are going to apply the patch set. To shut down all Oracle RAC instances for a database, enter the following command where db_name is the name of the database: $ srvctl stop database ‐d db_name D、If Automatic Storage Management instance is present, then shut down all Automatic Storage Management instances on all nodes. To shut down an Automatic Storag