光纤收发器百兆英文说明书.docVIP

Copyright statement This publication may not be reproduced as a whole or in part, any way whatsoever unless prior consent has been obtained from us. FCC warning The media converter have been tested and found to comply with the limits for a Class A digital device ,pursuant to Part 15 of the FCC Rules .These standards are designed to provide reasonable protection against harmful interference when these devices are operated in commercial environment These devices can use ,generate and radiate radio frequency energy and may cause harmful interface to radio communications unless installed in accordance with this User’s Guide .Operation of this device in a residential area is likely to cause harmful interface which will make the user responsible for the appropriate remedial action at his/her own expense. CE mark Warning These are Class A products. In a domestic environment these products may cause radio interface in which case the user will need to consider adequate preventative measures. Package Content Thank you for purchasing our Ethernet Media Converter. Before you start installing the Media Converter, verify the following items in the package ?? Media Converter ?? User’s Manual ?? Power Adapter The Media Converter makes it possible to mix network media to optimize total cost of ownership when you are extending legacy twisted-pair network to a fiber-optic backbone. , It is primarily designed for larger and higher bandwidth demanding workgroups that require expansion of the Ethernet network. The media Converter features a RJ45 jack and an ST/SC/FC fiber optic connectors, connecting the 10/100Mbps network to the 100BASE-FX (fiber optic) network. At full duplex mode, the converter can extend distance up to 2 kilometers for Multi-mode fiber and up to 100 kilometers for Single-mode fiber., maximize conversion options and network design flexibility Features Compliant with IEEE802.3 10Base-T, and IEEE802.3u 100Base-TX/FX standards ?Support auto-negotiation function i