ANSYS AIM流固耦合分析示例.pdf

TryItNow! Step by Step Walkthrough: Spoiler Support 1 ? 2015 ANSYS, Inc. March 28, 2016 TryItNow! Step by Step Walkthrough: Spoiler Support ANSYS designed this TryItNow! experience to give you quick access to ANSYS AIM simulations on the cloud. This AIM demonstration shows the air flow over an automotive rear spoiler and the resulting stresses in the spoiler support. The simulation demonstrates the ease of setting up and solving a multiphysics simulation. This geometry has been processed in SpaceClaim to use half the symmetric part and add a fluid flow enclosure around the structure. Ready to learn more about ANSYS AIM? CONTACT US 2 ? 2015 ANSYS, Inc. March 28, 2016 Select Fluid-Structure Interaction Template Select the Fluid-Structure Interaction Template from the Study menu in AIM 3 ? 2015 ANSYS, Inc. March 28, 2016 Modify Template Settings 1. Turn off structural contact detection. This is more efficient when there is only one structural part. 2. Turn on configuration to more easily work with separate solid and fluid parts. 3. Select “Create Simulation Process” and select the geometry file spoiler.scdoc to execute the template. 4 ? 2015 ANSYS, Inc. March 28, 2016 Task Based Workflow The necessary simulation tasks are created, and the geometry loaded. 5 ? 2015 ANSYS, Inc. March 28, 2016 Su