A182/A182M-05a高温设备用锻制或轧制的合金钢管法兰、锻制管件、阀门及零件.pdf 17页

  • 1
  • 0
  • 0
  • 约14.76万字
  • 2017-05-08 发布


    1. 1、本文档共17页,可阅读全部内容。
    2. 2、本文档内容版权归属内容提供方,所产生的收益全部归内容提供方所有。如果您对本文有版权争议,可选择认领,认领后既往收益都归您。
    3. 3、本文档由用户上传,本站不保证质量和数量令人满意,可能有诸多瑕疵,付费之前,请仔细先通过免费阅读内容等途径辨别内容交易风险。如存在严重挂羊头卖狗肉之情形,可联系本站下载客服投诉处理。
    4. 文档侵权举报电话:19940600175。

    Endorsed by Manufacturers Standardization Designation: A 182/A 182M – 05a Society of the Valve and Fittings Industry Used in USDOE-NE Standards Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service1 This standard is issued under the fixed designation A 182/A 182M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope* 2. Referenced Documents 1.1 This specification2 covers forged low alloy and stainless 2.1 In addition to the referenced documents listed in Speci- steel piping components for use in pressure systems. Included fication A 961/A 961M, the following list of standards apply to are flanges, fittings, valves, and similar parts to specified this specification. dimensions or to dimensional standards, such as the ASME 2.2 ASTM Standards: 3 specifications that are referenced in Section 2. A 234/A 234M Specification for Piping Fittings of Wrought


    • 内容提供方:开心农场
    • 审核时间:2017-05-08
    • 审核编号:7106056031001005