F18-21整体式防喷器组的研制.pdfVIP

第 37 卷 第 2 期 石 油 钻 采 工 艺 Vol. 37 No. 2 2015 年 3 月 OIL DRILLING PRODUCTION TECHNOLOGY Mar. 2015 1000 – 7393 2015 02 – 0124 – 03 doi:10.13639/j.odpt.2015.02.033 文章编号： （ ） 　　　 F18-21 整体式防喷器组的研制 张　川　宋振华　郑　泳　刘　鸣　唐秋林　袁　影 （中国石油宝鸡石油机械有限责任公司广汉钻采设备厂，四川广汉　618300） 引用格式：张川，宋振华，郑泳，等 .F18-21 整体式防喷器组的研制［J ］. 石油钻采工艺，2015 ，37（2）：124-126. 摘要： 随着钻井、修井工艺对防喷器组总体高度、体积大小的要求越来越苛刻，为了更好地满足特殊钻井的需求，研制了 F18-21 整体式防喷器组。通过有限元分析，一次铸钢成型的防喷器壳体满足《井口装置和采油树设备规范》；通过各项性能试 验，其壳体强度、液控油缸强度、环形胶芯密封性能、闸板胶芯密封性能、主通径都可以满足现场应用的需要。现场装配结果表 明，该整体式防喷器组较常规防喷器组总体高度降低 500 mm、总重量减轻 600 kg、密封泄漏点减少 2 处，具有结构紧凑、性能可 靠、省时省力的特点。 关键词：防喷器；整体式；钻修井 中图分类号：TE931.1　　　文献标识码：B Development of F18-21 integral blowout preventer stack ZHANG Chuan, SONG Zhenhua, ZHENG Yong, LIU Ming, TANG Qiulin, YUAN Ying （Guanghan Drilling Equipment Factory, CNPC Baoji Petroleum Machinery Co. Ltd., Guanghan 618300, China ） Abstract: In order to meet the increasingly demanding requirements for the total height and volume of blowout preventer (BOP) stack from drilling and workover technologies, particularly the special drilling requirement, the F18-21 integral BOP stack has been developed. Finite element analysis shows that the BOP shell of one-step cast meets the Equipment Specifications for Wellhead Apparatus and Christmas Tree. Various functional tests show that its shell strength, hydraulic-controlled cylinder strength, sealing property of annular rubber core, sealing property of valve plate rubber core and main path diameter all meet field application requirements. The field assemblage result shows that, compared with the conventional BOP stack, this integral BOP stack is about 500 mm shorter at height, 600 kg light at weight, and 2