新型倒三角桁架正偏载性能.pdf

Hindawi Publishing Corporation 顎爀 Scienti铿乧 World Journal Volume 2014, Article ID 615927, 13 pages /10.1155/2014/615927 Research Article Structural Performance of a Hybrid FRP-Aluminum Modular Triangular Truss System Subjected to Various Loading Conditions Dongdong Zhang,1 Yaxin Huang,1 Qilin Zhao,1 Fei Li,2 Feng Li,1 and Yifeng Gao1 1 College of Field Engineering, PLA University of Science and Technology, Nanjing 210007, China 2 Institute of Logistics Engineering of PLA, Chongqing 400000, China Correspondence should be addressed to Qilin Zhao; zhaohsql919@163.com Received 7 May 2014; Revised 23 July 2014; Accepted 28 July 2014; Published 28 August 2014 Academic Editor: Antonio Boccaccio Copyright 漏 2014 Dongdong Zhang et al. his is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. A novel hybrid FRP-aluminum truss system has been employed in a two-rut modular bridge superstructure composed of twin inverted triangular trusses. he actual lexural behavior of a one-rut truss has been previously investigated under the on-axis loading test; however, the structural performance of the one-rut truss subjected to an of-axis load is still not fully understood. In this paper, a geometrical linear inite element model is introduced and validated by the on-axis loading test; the structural performance of the one-rut truss subjected to of-axis load was numerically obtained; the dissimilarities of the structural performance between the two diferent loading cases are investigated in detail. he results indicated that (1) the structural behavior of the of-axis load difers from that of the on-axis load, and the of-axis lo