国家优质工程煤矿工程现场复查要点(国外英文资料).docVIP

国家优质工程煤矿工程现场复查要点(国外英文资料) The key points of the on-site review of the quality engineering coal mine in the country First, the construction of the mine project Major review content Information should be available Quality of physical appearance The specification of execution, standard Vertical shaft project (1) to inspect the section of the shaft and the vertical wall of the well wall; (2) to inspect the quality of the well wall; (3) to inspect the total flow of the wellbore; (4) to examine the test report of the materials and samples for the inspection and acceptance of concealed projects, and the quality inspection and certification of the project; (5) the quality of the shaft wellbore. (1) the wall of the well wall and the actual test. (2) the quality grade is excellent and the quality level is good. (3) the total amount of water leakage in the wellbore is not greater than 6 tons/h. (4) the record of concealed projects, the materials and test reports. (5) the installation and acceptance record of the rig is completed, the quality grade is good, and the ride in the cage feels smooth. (1) construction and acceptance of construction and acceptance of mines in the Peoples Republic of China (gbj213-90) (2) evaluation criteria for quality inspection of coal mine shaft lane in the Peoples Republic of China. (MT5009-94) Slant shaft engineering Adit engineering (1) the estuary project; (2) the work of the shaft body; (3) waterway engineering; (4) floor level and step project. (1) the record of the acceptance of the completion and the quality grade are excellent. (2) raw material test and test report. (3) the surface of the shaft, the concrete end of the tunnel and the surface of the wing wall are evenly balanced. Summer-planting place mode, no obvious fault, the silhouette is clear, line straight, the edge, the slope of attack and firm, good water and soil conservation, drainage standard, the catchment is smooth, without sedimentation. (4) the floor is flat and the ditch is