H42-31各色环氧甲板漆(国外英文资料).docVIP

H42-31各色环氧甲板漆(国外英文资料) H42-31 various epoxy deck paint Q/GHTD 33 Group into epoxy resin, polyamide curing agent, antirust pigment, constitution of pigments, additives and solvent paint or anti-skid paint a two-component epoxy deck. The main character is characteristic of excellent abrasion resistance · having excellent water resistance The film is tough and has a certain roughness · with excellent adhesion, impact resistance and other physical properties · having good durability To be approved by China classification society The road is suitable for the use of anti-skid paint on the deck of ships steel structure. Colour and exterior grass green, iron red, gray and so on The amount of the work is matched by the part of the group: the b component = 3:1 (weight ratio) The dry film is 90mm thick The wet film is 130mm thick The theoretical dosage is 179g/m2 27 ℃ or higher flash point first division points The hydrated 27 ℃ or higher The drying time (25 ℃) No less than 4h Dry or equal to 24h Completely cured 7d The curing time (25 ℃) 30 min Applicable period (25 ℃) 6 h Applied time interval (25 ℃) The substrate temperature 5 ℃ 20 ℃ 30 ℃ shortest 48 h. 24 h. 12 h. longest 14 d 7 d 5 d The recommended coating number 2-3, dry film thickness of 180-270mm (not including the thickness of emery) The preceding trace is lacquered with paint h06-4 epoxy rich zinc antirust paint, e61-1 inorganic zinc antirust paint, 842 epoxy cloud iron anti-rust paint The surface of the table should be completely dry · remove all the oil and debris from the paint Substrate temperature, substrate temperature must be higher than 3 ℃ above the dew point When construction temperature below 5 ℃, curing reaction of epoxy resin and curing agent to stop, unfavorable for outdoor construction. · relative humidity is not greater than 85% The coating method can be applied without air spray or brush painting (1) H06-4 epoxy zinc-rich anticorrosive paint, inorganic zinc silicate E06-1, 842 epoxy micaceous iron o