人工清理基槽(国外英文资料).docVIP

人工清理基槽(国外英文资料) Technical background record Table C2-1 Make no. 01-00 - C2-004 The name of the project Tianzhu town childrens transformation project Date of disclosure On November 21, 2013 Construction unit Beijing shunyi construction engineering company Project name Earthwork excavation Clarificaiton feed Manual clearance Content: (page 1) First, preparation for construction Main machine tools: spade, cart, small white line, steel tape, slope ruler, etc. Working conditions: 1.2.1 mechanical excavation of the earth to achieve the reserved surface. The base layer is basically flat after excavation. During the night construction, there should be adequate lighting facilities in case of the wrong digging or poaching. 1.2.4 should be carried out manually in the areas where the mechanical construction is unable to operate and the slope of the slope and the cleaning base of the slope. Second, the operation craft Process flow: Determine the order and the slope of the trough to clear the dirt, the trim and the bottom The order and grade of the soil Because of the excavation depth, two mechanical mining, excavation of the whole order will take place from west to east, so black soil with mechanical excavation sequence. 2.3 clean up the earth The configuration of 2.3.1 people: four people clean soil, two people carry dirt, two people are too flat. 2.3.2 shall not in place of clear good mechanical mining and distance piles at different position, and shall, within the scope of the soil can be shipped to dig to mechanically poached in a timely manner. But the working face of manual cleaning should not be less than 3 meters from the scope of mechanical excavation. The sides of the 2.3.3.base groove are repaired by hand, and the slope is smooth. In the process of cleaning up the soil, the position shall be measured by the step, and the axes of the axis shall be marked, so that the detail shall be excavated to the predetermined elevation. After the mechanical exit, the bottom and slo