人工湿地工艺流程和实验方案(国外英文资料).docVIP

人工湿地工艺流程和实验方案(国外英文资料) A, goals, According to the low town life sewage treatment in our province, small town economy generally is not high, the relative lack of technical management personnel, the constructed wetland technology in pingxiang south pit town to develop the technique of artificial wetland sewage processing small towns demonstration engineering research, for jiangxi province water environmental pollution problem increasingly prominent small towns to provide an effective solution. Using artificial wetland technology to south pit river sewage treatment and artificial wetland treatment system water quality reach the town sewage treatment plant pollutant discharge standard (GB18918-2002) in the level 1 B standard. Second, process introduction The control process of this research is: sewage Bar corrupt grille Diversion channels Primary anaerobic biologic ponds First class submerged wetlands The secondary biological pond Secondary submerged wetlands The water Three levels of submerged wetlands Vertical sand filter Main structures (1) primary oxidation pond Primary biological pond to the anaerobic biological pond, the front set bar grille and sand basin, through the bar corrupt grille to intercept rubbish into the wetland system of large particles and clean up. The area is 1200m2 and has a capacity of 3500m3. The water is flooded in the form of overflow weir, which ensures a relatively calm and stable environment. The pond body is built on the elevation of the terrain, ensuring the effective water depth of 2.5 m, and the main configuration of the reservoir is the large succul lotus. (2) subgrade diving wetlands After dealing with the first class (anaerobic) biological pond of sewage, use of elevation difference form aeration falls, falls from hui channels, through the perforated pipe arrangement in the primary undercurrent wetland system. The design of the first stage submerged wetland is 25m * 80m * 2.5 m (2000m2, 5000m3), the design packing depth is about 2.5