关于工程设计变更的原则、程序、要求及实施2(国外英文资料).docVIP

关于工程设计变更的原则、程序、要求及实施2(国外英文资料) The principles, procedures, requirements and implementation of the engineering design change The principle of engineering design change. Changes must be made within the framework of the initial approval; The approval unit of the change; (1) the unit of owner of the examination and approval unit, (2) of the project. Change of approval authority: (1) the principal part of the project, the main structure, the larger change 15% exceeds the probable to examination and approval for examination and approval of the original set unit and (2) the principal part of the project, the main structure and general changes by the project owner for approval. You may propose a unit of design change: (1) the owners unit, (2) design unit, (3) construction unit, (4) supervising agency. Second, the process of change. The changes made by the owner shall be carried out by the design of the technical drawing, the approval of the owner and the approval of the supervision. Design changes: the owner approves and the construction unit is carried out after the inspection. The changes made by the construction unit: the preliminary opinions, the approval of the design audit, the approval of the owner, the implementation of the construction party by the construction unit. Changes made by the supervisor: approved by the design, approved by the owner, and implemented by the construction workers. Measure the with the change drawing chart. The detailed measures for measuring and paying for the supervision shall be made by the landlord, and the payment shall be made after the owners signature. Third, concrete implementation measures. The construction unit puts forward report form CB34 , supervisory audit, owners approval. Change application report 2. Construction units reported CB23 , supervision of audit agree, design review, the owner sign the recognition, has set up a file in the CB34 report approved, supervisory review put forward the measurement payment of specif