径向滑动轴承过盈装配变形的研究.pdfVIP

Apr.2ω8 润滑与密封 2008 年4 月 Vol. 33 No.4 第33 带第4 期 LUBRICATION ENGINEERING 径向滑动轴承过盈提配变形的研究* ::E贤刚孙盖丽夏成员 (上海大学机电工程与自动化学院上海2α)()72) 摘要利用 s ……和……承套产生…叫 以锡1号铜材料为例，分析了泊腹温度和压力、轴承过盈量、轴承厚度、轴承座厚度对轴承变形的影响。结果表明:泊膜 鹏对铀承…大附时应该考虑一M力作用时叫一… 大;但轴承座的厚度和过盈量对此变形影响很小，可以忽略。 Research of Defonnation in Journal Bearings with Interference Fit Wang Xiangang Sun Meili Xia Chengyong (School of Mechanical Engineering 8lId Automati棚，Shanghai Vniversity ,Shanghai 2肌用72 ， China) Abstract: The defonnation of joumal bearings produced by interference fitting ,oil film temperature and pressure wω simulated by ANSYS. 咀le influce of the 明antity of interference fitting and the thickness of sleeve and base of bearings on the defonnation was analyzed under specific conditions 机出 Q 世 Sn ， a kind of popular material for bearing as an example. 叽le result自由how that the oil film temperature has great effect on the defonnation of sleeve. When considering the effect of temperature and pressure of oil film ,the deformation of sleeve increases with the increase of the thickness of sleeve ,but the base thickness and the quantity of interference fitting has litÙe effect on the defonnation of sleeve. Keywo呻:joumal bearing; finite element analysis (FEA) ;elastic defonnation; interference fit 止推滑动轴承工作过程中，其轴向间隙对轴承的 承，在安装后，会得到不阔的过盈量，问时会得到不 工作精度、翻升、噪声、承载和使用英子命等有很大影 同的轴承间隙。一定的油膜温度和油膜压力对轴承间 响，轴肉间隙过大形成不了油膜、过小会破坏油膜。 隙也有影响。为探讨以上因索对轴承工作间隙的影响 程度，本文作者研究滑动轴承中过盈装配和油膜温度 影响轴承轴向间隙的因素很多，如载荷、