煤炭采制样治理办法（国外英文资料）.docVIP

煤炭采制样管理办法（国外英文资料） One purpose Range of application Reference standard The provisions of the following documents shall be the provisions of this standard through the reference of this standard. Every note date reference documents, its all subsequent modification single (not including errata content) or revised edition are not applicable to this standard, however, according to the agreement of the parties of this standard are encouraged to study whether can use the latest version of these documents. The latest version of an undated reference file applies to this standard. 3.1 reference standard The commodity coal sample adopt method GB475-1996 The preparation method of coal sample GB474-1996 Method of determination of total moisture in coal Coals industrial analysis method GB/T212-2001 The calorimetry of coal is measured in GB/t213-2003 Method GB/T214-1996 Coal ash melt determination method GB/t219-1996 4 technical terms The process of preparation and testing of a representative coal sample according to the prescribed method. Standard coal sample: high uniformity, good stability and accurate quantity of coal. Verification: the verification in this standard refers to the evaluation of the precision and accuracy of the instrument equipment by the inspection department authorized by the state. Calibration: a check of the accuracy of the instrument using standard material. Executive program 5.1 in plant coal sampling The 5.1.1 coal sample adopted the GB475-1996 commodity coal sample method. The sample crew is ready to take samples in the first 30 minutes before coal is available. 5.1.3 to the coal plant must be sampled at 3 o clock. The coal shall be sampled in the loading and unloading of the coal in the loading and unloading process. 5.1.5-car coal will be sampled by the three point cycle, and can be sampled during the unloading process. 5.1.6 in the process of sampling, if found a large number of mixed coal waste rock, sand, iron and other fake (ship), should timely r