thinkpad sl410 bios 设置（国外英文资料）.doc

thinkpad sl410 bios 设置（国外英文资料） Unit has just sent me an old laptop SL410, then I adjusted the Internet related to BIOS Settings, according to the basic are SL410 BIOS options, so the hair up, in the province of rework. Boot up, press F1, enter the BIOS system, and well see the BIOSs main interface: Config - - BIOS basic Settings Date/Time - the BIOS system Time/Date setting Security -- the BIOS password and Security Settings Startup -- the BIOS launch setup Restart -- the BIOS exit setup HDD diagnostic program - hard disk diagnostics The BIOS basic information and hardware information are set below. One, CONFIG - BIOS basic Settings Low Network Wake On LAN - the network awakens: it can be turned On by other computers On the LAN. Personal advice to close this option. The Ethernet LAN Option ROM - loads the Ethernet LAN Option ROM from the integrated network device. (a special feature of Ethernet CARDS, by default) Wireless LAN Radio Frequency - - Wireless network card broadcast: recommended to open for more Wireless support. When the USB USB BIOS Support - USB input/output system Support: open it for better USB Support. Always On USB power: you can also power USB devices when you turn off. Open the When the rid_device_info_keyboard/Mouse Fn key Lock - - Fn switch. Enabled : using the combination of FN + F3 key, press the FN key 2 times, can do not need to hold the FN key, directly choose F3. Disabled : must be at the same time, FN + F3 to start off the function of the LCD. ThinkPad NumLock - the number key lock item. If you choose Independent, you can disable NumLock on your ThinkPad computer by ignoring the NumLock status on the external keyboard. If NumLock is enabled on the ThinkPad computer, NumLock on the external keyboard is also enabled. If Synchronized is selected, NumLock on the ThinkPad machine synchronizes with NumLock on the external keyboard. When the Display The Boot Display Device - which is the first Display Device, or the CRT is the first Display