化工工艺流程图制图标准（国外英文资料）.doc

化工工艺流程图制图标准（国外英文资料） In this paper, by yang5227 contribution Doc documents may have a poor browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view. CAD drawing standards Basic requirements mainly drawings, proportion, the choice of font and line. 1, pattern painting: the painting is also called the drawings, in computer graphics, shall be equipped with corresponding pattern painting, the title bar, code column, the column of additional content, assembly or installation drawing shall be provided with general schedule of the content, process flow diagram should be prepared on illustrations etc. GB/T 14689-93 technical drawing pattern picture format has been the pattern in the picture with the provisions of the format in detail. When it is used in computer graphics, according to the actual need, pattern painting can also set the following content: (1) the direction sign: used to determine the direction of view of the CAD drawings. (2) the shear symbol: used to cut a deal. On the CAD drawings (3) the metric reference index: provide reference for the pattern size proportion. (4) of the symbol: used to play a role on the direction of CAD drawings. For complex assembly drawing CAD general requirements set in the standard glyph partitions, glyphs partition is mainly used for deposit for drawing graphics, size, structure, and explain the content such as a search, location convenient. At the same time provisions have extended widen the request for drawing in CAD drawing, should be in accordance with the basic format of short side (B) into integer times increase. 2, scale: used for the CAD drawings should be in accordance with the proportion of the national standard GB/T 14609-93 technical drawing ratio concerned regulation, specific see table 2 - (2) when necessary can also choose the proportion in table 2-3. 3, font: CAD drawing of the font should be according to the technical drawing font the relevant provisi