ONES刻录软件参数选项说明(国外英文资料).docVIP

ONES刻录软件参数选项说明(国外英文资料) Tags: it The ONES inscribe software parameter options specification When using the ONES software to burn CDS, there are four options in the burn. Track At once - Mode 1 -- open Track At once - Mode 1 - Closed Track At once - Mode 2 - open Track At once - Mode 2 - Closed Session At once - Mode 1 -- open Session At once -- Mode 1 -- Closed Session At once - Mode 2 -- open Session At once - Mode 2 - Closed Track At Once -- -- -- Track record. Session At Once -- -- -- -- -- the section burner. Track At Once: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- It supports data that is written multiple times to a section, mainly for the music or mixed, special type of disc. Session At Once: The writing mode only records one section at a time rather than the entire disc, and the rest of the CD space can be used again. Often used for multi-section cd-rom production. The advantage is that it is suitable for making a compact disc. But every burn a new section takes up about 13 MB disc space used to store the structure of the section and a section of the connection information, and to prepare for the next section. So too much of the extents will waste more CD space, not a good deal. Mode 1: -- -- -- -- -- -- -- -- -- in the cd-rom joined the ECC (Error Checking and Correction, the Error Checking revisions) check, can store 2048 Byte data each magnetic area, suitable for storing data. Mode 2: To remove the ECC check, add the file storage space, each magnetic area can store 2336 bytes, suitable for storing graphics and music data. -- -- Open -- -- -- -- -- -- -- -- -- -- -- Its Close to Close -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Mode1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- (ECC error correcting code data structure, general CDROM all use this format) -- -- -- -- -- -- -- -- -- Mode2 / XA -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- (without data structure of