汽车ASR系统(国外英文资料).doc

汽车ASR系统(国外英文资料) A, what is ABS ABS - Lock BrakeSystem The danger of dying in front of a car: losing the ability to turn. The damage to the rear wheel of a car: the loss of the anti-skid ability, the tail, the side slide; Second, the purpose of ABS In automobile braking, prevent wheel lock drag slippery on the road, in order to improve the directional stability, steering control in the process of automobile braking ability and shorten braking distance, make the car braking more safe and effective. The relationship between the sliding rate of the wheel and the coefficient of adhesion Adhesion = pressure times attachment coefficient Factors affecting the adhesion factor: besides the structural parameters of the tyre, use load and internal pressure, and the speed and surface conditions, and the slip rate Five, ABS function The sliding rate of the wheels of the car is kept near the slip rate of the maximum adhesion. The composition and working principle of ABS Normally, ABS is composed of wheels speed sensors, ABS electronic control unit, brake pressure adjustment device and brake control circuit on the basis of common braking system. The advantages of ABS system Increase the stability of car braking, shorten the braking distance and improve the wear condition of the tyre Another advantage of the ABS system is that it is easy to use and reliable Disadvantages: (1) the amplitude of the output signal varies with the revolution (2) the response frequency is not high (3) the ability to resist electromagnetic interference is poor Principle of the main component structure of ABS system One, wheel speed sensor features: (1) the output voltage amplitude is not affected by the rotational speed. (2) the frequency response is high (3) the ability to resist electromagnetic interference is strong Second, the ECU Brake pressure regulator (circulating type) Attention to ABS maintenance: When ignition switch is in ignition position, do not remove electrical components and wire plugs in