del系统(国外英语资料).docVIP

del系统(国外英语资料) I have the data to see: the BIOS sets the detailed solution Because most users adopt an AWARD BIOS, this is an example of a key setup project for the BIOS parameter. When the boot is turned on, press the DEL button to enter the BIOS Settings main menu: STANDARD CMOS SETUP (STANDARD CMOS SETUP) BIOS FEATURES SETUP (BIOS feature SETUP) CHIPSET FEATURES SETUP (CHIPSET feature set) POWER MANAGEMENT SETUP (energy MANAGEMENT SETUP) LOAD BIOS Defaults (LOAD the BIOS initial value) LOAD SETUP DEFAULTS (LOAD SETUP initial value) SUPERVISOR PASSWORD (administrator PASSWORD) USER PASSWORD (USER PASSWORD) IDE HDD AUTO DETECTION (IDE hard drive auto-detection) SAVE EXIT SETUP (SAVE and EXIT) EXIT WITHOUT SAVING STANDARD CMOS SETUP (STANDARD CMOS SETUP) This section sets the date, time, and basic hardware configuration and error handling for the system. Date: this is used to set the current Date of the system as month/day/year, the size of the Page Up/Page Down or + / - key. TIME: this is used to set the current TIME of the system, in the form of TIME/minute/second, the size of the PAGE UP/PAGE DOWN or + / - key. HARD DISK DRIVER: the HARD DISK DRIVER. There are PRIMARY and SECONDARY device slots on the motherboard, and each IDE slot can connect to two IDE drives or other IDE devices: PRIMARY MASTER, PRIMARY SLAVE, SCEONDARY MASTER, SECONDARY SLAVE. The hard disk parameter values include: CYLS, read and write heads, PRECOMP, LANDZ, SECTOR, and MODE. SIZE will be adjusted automatically based on other parameters. The ODE project is designed specifically for IDE hard drives. MODE has three sets of values: NORMAL, LARGE, LBA, or AUTO. The hard disk below 528MB USES MORMAL. More than 528MB and support LOGICAL BLOCK ADDRESSING (LBA) for LBA, otherwise LARGE. LARGE is not common, only in ms-dos. Hard disk parameters setting, its TYPE value can be set to AUTO, this system in the boot self-checking automatically detect, also can use the main menu IDE HDD DETECTION option to