VRS 连续运行的空间定位系统(国外英语资料).docVIP

VRS 连续运行的空间定位系统(国外英语资料) VRS is a continuous running space location system Accurate GPS real-time differential positioning is one of the most widely used measurement techniques. However, its application was limited by ionosphere and tropospheric influences, which produced systematic errors in raw data. In practice, this means that the distance between the mobile station (mobile station) receiver and the reference station has to be reduced greatly to ensure that the system works effectively. The concept of Virtual Reference Station (Virtual Reference Station) provides a new opportunity. When use, the system error in the reference station data is to reduce or eliminate, in this way, not only means that the user can increase the rover and the distance between reference station, also increase the reliability of the system, and reduces the OTF initialization time. This concept is not only used for building new networks, but also improves the performance of existing, established networks. All reference stations are connected to the control center. The control centers computer runs the gps-network software, which is the nerve center of the whole concept. GPS - Network connects all receivers in the Network, and it will perform several important tasks including: Import raw data and perform quality checks Store RINEX and compress the RINEX data Correct antenna phase center (IGS) Model and estimate of system error Generate the data and create a virtual base station for the mobile station receiver Generate the RTK to correct the data flow in the location Send RTK to correct the data to the field station The RTK data will be propagated in RTCM or Trimble CMR formats. The gps-network will use these parameters to recompute all GPS data, plug in and match the mobile stations, and the stations can be located anywhere on the Network. Thus, the RTK system error is eliminated. How the system works Mobile stations use mobile phone communication First of all, the GPS rover to run GPS - N