如何用路由连接两台电脑(国外英语资料).docVIP

如何用路由连接两台电脑(国外英语资料) Method one: First of all, it is important to know whether you are a netcom or telecom network, respectively, for netcom routing and telecom routing. After you have made a distinction, insert the main thread (and the network wire or the wire) into the WAN port, and then find two connection between the networks LAN and two machines. On a machine, right-click an online neighbors property -- double-click the local connection -- attribute -- double-click Internet protocol input: instead Then open the E icon (and the browser) to enter in the address bar Enter the routing login screen, enter admin for the user name, and admin for the password Enter the route Settings page and follow the instructions above. It is ok Note: First look at the routing instructions, which are useful in the manual. The second IP 192. 168. 1. 3 255. 255. 255. 0 192. 168. 1. one Method 2: Tp - link router Settings graphical 18:06 broadband ADSL everyone in 2007-03-10, and in order to save money on the Internet, we share a few people with the same ADSL line, which requires a routing cat (Moden), set after the cat, with an 8 or 4 mouth mouth 10 m Ethernet hub, such as, for example - 2008 ivgl 8 mouth 10 m Ethernet hub is good, price is 120 yuan. Connected to the Internet. Of course, more people are using a cat + a router, a hub to share the Internet. Im going to use the l-r410d multifunctional broadband SOHO router (priced around $100) to illustrate the setup method. 1, connect the line to good, wan kou connect the net (namely ADSL or other broadband), LAN kou net is your computer network card; Each router has a default IP address, which is known by the instruction manual. My . Configure your computer IP for 192.168.1. X, gateway and DNS to the router, or . Turn on Internet Explorer on your computer and enter / into the routers configuration interface. 5, general instructions to its said that you can browse the web with smooth, in fact, we find that our computer can not fundame