激光扫描条码识读器(国外英文资料).docVIP

激光扫描条码识读器 Laser scanning bar code reader has been widely used for its unique advantages such as large depth of field, high scanning speed, wide scanning range and so on. In addition, the laser full angle scanning reader is widely used in various fields with high degree of automation and large amount of logistics due to the ability to scan the bar code symbols in any direction at a high speed. The laser scanning bar code reader consists of laser source, optical scanning, optical receiving, photoelectric conversion, signal amplification, shaping, quantization and decoding. These components are discussed in detail below. (I) Ji Guangyuan The visible light semiconductor laser fabricated by MOVPE (metal oxide vapor phase epitaxy) technology has the advantages of low power consumption, direct modulation, small size, light weight, solid, high reliability, high efficiency and so on. It appears that quickly replaced the original use of He Ne laser. The beam emitted by a semiconductor laser is a non symmetrical elliptical beam. A divergent beam perpendicular to the P - W junction direction angle is 30 degrees above V, parallel to the junction plane divergence angle is 10 degrees, V. Such as the use of traditional beam collimation technology, exchange of long and short axis direction will be elliptical spot of laser focus on both sides of the. Obviously, this will allow the scanner to have only a small scanning depth of field. Jay and M.Eastman proposed the beam collimation technique shown in Figure 3 to overcome this switching phenomenon and greatly improve the scanning depth of field. The elliptical beam can only be applied to single line laser scanners. When the light path is arranged, the long axis of the ellipse of the spot should be perpendicular to the direction of the light scanning. For single line scanning readers, the elliptical spot is better than the round spot below due to insensitivity to the printed noise. For the full angle bar code scanning reader, because t