大棚钢架施工组织设计1(国外英语).docVIP

大棚钢架施工组织设计1(国外英语资料) The first chapter is a brief description of the project This project is the construction project of the stainless steel hall. Adopt column bottom chord point of support, the project is put four pyramid form, the total projection area 36.84 ㎡. Production and processing characteristics This project should be arranged rationally in the production process to ensure the normal operation of each process. First, the size of the bottom material of each pole must be accurate and the factors affecting size such as the amount of welding shrinkage are taken into account. Bolt ball processing is accurate, the Angle error control is within 6159. The components of bolts, seals, cones, sleeves, and tops shall be inspected according to corresponding standards and specifications to ensure the quality of the network. The design, production and construction of the frame, and acceptance must comply with the following specifications: The structure and construction of the lattice. Evaluation criteria for quality inspection of web shelf structures. Specifications of steel structure design gbj17-88; Steel grid industry standard jgj75.1-75.1-91 Steel mesh bolt ball node with high strength bolt GB/T16939; Construction load regulation gbj9-87. Chapter ii production and processing 2.1 processing range The project is a stainless steel mesh frame project, and the material is in the factory to ensure the material meets the design requirements. Article 2.1.2 material preparation is ready for the contract to be ready for payment within 5 days after the date of the contract, and then start to organize the production processing for 5 days. The frame shall be machined at the site of the installation, and the period shall be five days, ensuring the completion within the time limit stipulated in the contract. 2.2 operating procedures Materials are inspected, samples, material, cutting, spot welding, welding, inspection, finished product correction, numbering, marking, piling and trans