LC、DCS、FCS三大控制系统的特点和差异（国外英文资料）.docVIP

LC、DCS、FCS三大控制系统的特点和差异 The characteristics and differences of three major control systems of PLC, DCS and FCS (1) from switching control to sequential control, handling, from the bottom up. (2) continuous PID control and other functions, PID is in the stop station. (3) a PC can be used as the master station and more than one PLC as the slave station. (4) a PLC can be used as the master station, and a number of identical PLC as the slave stations, which constitute the PLC network. This is easier than using a PC as a master station: when a user is programming, he does not need to know the communication protocol, just write it according to the format of the instructions. (5) PLC mesh can be used either as an independent DCS/TDCS or as a subsystem of DCS/TDCS. (6) large systems with DCS/TDCS, such as TDC3000, CENTUMCS, WDPFI, MOD300. (7) PLC networks such as Siemens, SINEC, L1, SINEC - H1, S4 (wrong, removed), S5, S6 (wrong, removed), S7, etc., GEs GENET, Mitsubishi Cos MELSEC - NET, MELSEC - NET/MINI. (8) it is mainly used for sequential control in industrial process, and new PLC also has closed-loop control function. (9) manufacturers: GOULD (USA), AB (USA), GE (USA), OMRON (Japan), MITSUBISHI (Japan), Siemens (Germany), etc.. DCS or TDCS (1) decentralized control system DCS and distributed control system TDCS is set 4C (Communication, Computer), Monitoring technology of Control and CRT technology. (2) a tree topology system from top to bottom, in which communication (Communication) is the key. (3) PID in the stop station, the stop station connects the computer and the field instrument and control device. (4) tree topology and parallel continuous link structure, there are also a lot of cables from relay station parallel to field instrument. (5) analog signals, A/D - D/A, mixed with microprocessor. (6) one instrument, one pair of wires receive I/O, and the control station is hung to LAN LAN. (7) DCS is the 3 structure of control (engineer station), operation (operator