化机专业 英语.docVIP

筒体 shell 垫板 pad 接管 Nozzle 夹套封头 jacket head 封头 head 夹套 jacket shell椭圆封头 ELLIPSOIDAL HEAD 管箱 CHANNEL管板 TUBESHEET螺母 NUT法兰 FLANGE法兰盖 BLIND FLANGE垫片 gasket垫圈 washer搅拌装置 agitator device视镜 sight glass排气管 vent pipe进气管 gas inlet pipe接管 NOZZLE换热管 TUBE拉杆 TIE RO定距管 SPACER旁路档板 SEALING STRIP挡管 DUMMY TBUE双头螺柱 STUD BOLT螺柱 STUD BOLT螺栓 MACHINE BOLT六角头螺母 HEX NUT 顶丝 JACK BOLT接地板 EARTH LUG吊耳 LIFTING LUG耳座 SUPPORT LUG膨胀节 EXPANSION JOINT隔板 PASS PARTITION PLATE凸缘 PAD FLANGE补强圈 REINFORCEMENT PLATE折流板 BAFFLE防冲板 IMPINGMENT PLATE防涡流挡板 VORTEX BREAKER塔顶吊柱 TOP DAVIT排气孔 VENT HOLE泪孔 TEAR HOLE检漏孔 TELL-TALE HOLE 垫板 PAD PLATE腹板 WEB筋板 RIB底板 BASE PLATE填料箱 GLAND BOX保温螺母 INSULATION NUTS保温支撑 INSULATION SUPPORT铭牌 NAME PLATE铭牌座 NAME PLATE SUPPORT带颈视镜 SIGHT GLASS法兰盖 BLIND FLANGE导流板 BAFFLE夹套封口环 JACKET CLOSURE螺塞 PLUG堵头 PLUG视镜 SIGHT GLASS镀锌 galvanization组合件 COMPONENT衬板 LINING PLATE衬环 LINING RING管嘴 SPRAY弯头 ELLBOW束节 SOCKET管台 SOCKET镀锌 galvanization待定 HOLD跨中均布 STRADDLE EQUI-SPACED拉筋 RIB筋板 RIB撑筋 RIB人孔 MAN HOLE ASME常用词汇Abrasion, allowance for? 磨损，裕量Accessibility，pressure vessels? 压力容器可达性Access openings? 通道孔Allowance for corrosion, erosion, or abrasion? 腐蚀裕量侵蚀或/磨损裕量Applied linings, tightness 应用衬里密封性Approval of new materials,? 新材料的批准Articles in Section V?? 第V卷中的各章Article 1, T-150? 第1章T150? Article 2??? 第2章Attachments? 附件? lugs and fitting?? 支耳和配件? lugs for platforms, ladders, etc.? 平台，梯子等的支耳? nonpressure parts? 非受压件? nozzles? 接管? pipe and nozzle necks to vessel walls? 在器壁上的管子和接管颈? stiffening rings to shell? 壳体上的刚性环Backing strip? 垫板Bending stress, welded joints? 弯曲应力，焊接接头Bend test? 弯曲试验Blind flanges? 盲板法兰 Bolted flange connections? 螺栓法兰连接? bolt lands 螺栓载荷? bolt stress 螺栓应力? design of? 关于设计? flange moments? 法兰力矩? flange stresses?? 法兰应力 ? materials? 材料? studs? 双头螺栓? tightness of? 紧密性? types of attachment? 附件类型Bolts 螺栓Braced and stayed surfaces? 支持和支撑面Brazed connections for nozzles 接管的钎焊连接Brazed joints, efficiency of? 钎焊接头，焊缝系数? maximum service temperature 最高使用温度? strength of