基于CAN总线的高分辨率工业显示器控制器.pdfVIP

第35卷 第3期 电 子 器 件 Vol.35摇 No.3 2012年6 月 ChineseJournal of Electron Devices Jun.2012 High鄄Resolution Industry Display Controller Based on CAN Bus* * LIN Chaofan,HUANGJiye ,FANGZhou (Electronic Information Institution of HangzhouDianzi University,Hangzhou310018,China) Abstract:In order to optimize industry display,we proposed a method of taking the advantages of CAN bus to optimize the performance of the industry display controller with high resolution power. The innovation is the controller uses CAN bus totransport data,the commandsfromthe control key and digital input keysaretransported to the STM32 microcontroller,then STM32 microcontroller transportsdatato FPGA by internal FSMCinterface after operation and transformation.FPGA sends the data to SDRAM and the display is controlled by the data that FPGA takes and readsfrom SDRAM.The farthest distance of communication can reach 10 km and the speed can reach 1Mbit/ s.The experiments prove that the controller can improves the transmission speed and supports multiple devices and high鄄resolution compared with common serial screen. Key words:optoelectronic devicesdisplay technology;industry display optimization;base on CANbus;STM32;FPGA EEACC:7200摇 摇 摇 摇 doi:10.3969/j.issn.1005-9490.2012.03.027 基于CAN总线的高分辨率工业显示屏控制器* * 林超凡,黄继业 ,方摇 舟 (杭州电子科技大学电子信息学院,杭州310018) 摘摇 要:为了优化工业显示屏,提出一种利用 CAN 总线的优势来优化工业显示屏控制器的方法。 该控制器创新点在于以 CAN总线作为传输,控制键和数字输入键的命令集经CAN总线传输到STM32单片机,STM32单片机运算、转换数据后经内部 FSMC接口发送给FPGA,FPGA控制数据发送到SDRAM,显示屏由FPGA控制取读SDRAM 内部的数据并显示,最大通信距离 可达10km,通信速率可达1Mbit/ s。 经实验验证,能提高传输速率并且能支持多个设备和高分辨率显示。 关键词:光电子器件显示技术;工业显示屏优化;基于CAN总线;STM32;FPGA 中图分类号:TN27摇 摇 摇 摇 文献标识码:A摇 摇 摇 摇 文章编号:1005-9490(2012)03-0361-05 摇 摇 工业显示屏已被广泛用于工业控