复合结构裂纹扩展ALE.pdfVIP

Excerpt from the Proceedings of the COMSOL Conference 2009 Milan Dynamic Crack Propagation in Fiber Reinforced Composites 1 *,1 1 C. Caruso , P. Lonetti and A. Manna 1 Department of Structural Engineering, University of Calabria, Via P. Bucci, 87030, Rende, Cosenza, Italy *Corresponding Author Lonetti Paolo: email. lonetti@unical.it Abstract: A generalized model to predict dynamic order to simulate the dynamic crack growth, the crack propagation in fiber composite structures is proposed modeling utilizes a fracture toughness proposed. The proposed approach is based on a criterion based on the energy release rate (ERR) generalized formulation based on the Fracture and the corresponding mode components. The Mechanics approach and Moving mesh ERR is evaluated by means of the decomposition methodology. Consistently to the Fracture methodology of the J-integral expression, which Mechanics, the crack propagation depends from is proposed in the framework of the dynamic the energy release rate and its mode components, crack propagation [2]. The change of the which are calculated by means of the geometry, produced by a crack advance, is taken decomposition methodology of the J-integral into account by means of a moving mesh expression. The geometry variation, produced by strategy based on an Arbitrary Lagrangia- the crack advance, is taken into account by Eulerian (ALE) formulation, based on Winslow means of a moving me