《机械制造技术基础》模拟试题三答案（The mechanical manufacturing technology foundation simulation test three answers）.docVIP

《机械制造技术基础》模拟试题三答案（The mechanical manufacturing technology foundation simulation test three answers） The mechanical manufacturing technology foundation simulation test three answers 1. Briefly explain the following concepts: Right-angle free cutting: only one line blade is involved in the cutting, and the blade is perpendicular to the cutting mode of the synthetic cutting motion, the blade Angle of blade is 0. 2. Tool durability: start cutting after cutting tool edge, until the wear amount reaches the grinding standard of the cutter, and use T (s or min). 3. The devolop tumor: as the tool rake face and contact friction on the surface of the chip, when the cutting speed is not high and the formation of continuous chip, processing steel material or other plastic materials, often in the blade sticking a profile is triangular piece of lump, the hardness is 2-3 times of workpiece material hardness. 4. Internal contact transmission chain: it is the transmission chain that links the various parts of the motion of the composite movement. The relative motion of the actuator connected to the transmission chain has strict requirements. 5. Broaching graphics: broach broaching allowance is cut off from the workpiece in order, usually use graphics to express, broaching graphical selection is reasonable or not, directly affect the cutter tooth load distribution, the length of the broach, the size of the pin pulling force, wear and durability of broach, the workpiece surface quality, productivity and manufacturing cost etc. 6. Step: the content of the part of the process that is completed in the process of machining surface, cutting tool and cutting amount (excluding backbite). 7. Technological benchmark: reference refers to those points, lines, and surfaces used to determine the geometric relationship between geometric elements in a production object. Process reference is the benchmark used during the process. 8. Machining accuracy: the actual geometrical parameters (size, shape a