宽带电力线MIMO通信中基于能效的波束成形算法.pdfVIP

计 算 机 系 统 应 用 2017 年 第 26 卷 第 6 期 宽带电力线MIMO 通信中基于能效的波束成形算法① 1 1 2 潘子春 , 于 浩 , 柏思瑶 1( 国网安徽省电力公司 信息通信分公司, 合肥 230061) 2(华北电力大学 电气与电子工程学院, 保定 071003) 摘 要: 宽带电力线 MIMO 通信中, 由于存在多用户干扰和共信道干扰, 需要应用波束成形算法消除, 由于信道 状态信息不能准确获得, 需要对信道进行量化反馈, 故反馈误差会导致系统性能下降; 针对此问题, 本文提出了 一种考虑量化误差影响的波束成形算法, 此算法在保证用户服务质量的前提下, 以最大化系统能源利用效率为 优化目标, 仿真验证了此波束成形算法的有效性和鲁棒性. 关键词: 宽带电力线; 多输入多输出; 波束成形; 量化误差; 算法 Energy Efficient Beamforming Algorithm in Broadband Power Line MIMO Communication System 1 1 2 PAN Zi-Chun , YU Hao , BAI Si-Yao 1(Information and Communication Branch, State Grid Anhui Electric Power Company, Hefei 230061, China) 2(School of Electrical and Electronic Engineering, North China Electric Power University, Baoding 071003, China) Abstract: In broadband power line Multi-input multi-output (MIMO) communication, there are multi-user interference and co-channel interference, which needs an application of a beam forming algorithm to eliminate it. Because the channel state information cannot be accurately acquired, it needs a quantitative feedback for channels, so that the feedback error would cause a decline in performance of the system. Aiming at this problem, this paper proposes a beam forming algorithm, which considers the influences of quantization error of the algorithm. In the premise of ensuring the quality of customer service, this algorithm takes maximizing the system energy efficiency as the optimization goal. The beamforming simulation verifies the effectiveness and robustness of the algorithm. Key words: the broadband PLC; MIMO; beamforming; quantization error; algorithm