u-boot手册.docVIP

一、标准命令 ? Alias for help base Print or set address offset bdinfo Print Board Info structure boot Boot default, i.e., run bootcmd bootd Boot default, i.e., run bootcmd bootelf Boot from an ELF image in memory bootm Boot application image from memory bootp Boot image via network using BOOTP/TFTP protocol bootvx Boot vxWorks from an ELF image chpart Change active partition cmp Memory compare coninfo Print console devices and information cp Memory copy cpu Multiprocessor CPU boot manipulation and release crc32 Checksum calculation dhcp Boot image via network using DHCP/TFTP protocol echo Echo args to console editenv Edit environment variable env Environment handling commands erase Erase FLASH memory exit Exit script ext2load Load binary file from a Ext2 filesystem ext2ls List files in a directory (default /) false Do nothing, unsuccessfully fatinfo Print information about filesystem fatload Load binary file from a dos filesystem fatls List files in a directory (default /) fdt Flattened device tree utility commands flinfo Print FLASH memory information fsinfo Print information about filesystems fsload Load binary file from a filesystem image go Start application at address addr help Print command description/usage i2c I2C subsystem iminfo Print header information for application image imls List all images found in flash imxtract Extract a part of a multi-image interrupts Enable or disable interrupts irqinfo Print information about IRQs itest Return true/false on integer compare loadb Load binary file over serial line (kermit mode) loads Load S-Record file over serial line loady Load binary file over serial line (ymodem mode) loop Infinite loop on address range ls List files in a directory (default /) md Memory display md5sum Create/check md5sum message digest mii MII utility commands mm Memory modify (auto-incrementing address) mmc MMC sub system mmcinfo Display MMC info mtdparts Define flash/nand partitions mtest