景观建筑设计毕业论文参考文献（Literature review of landscape architecture design）.docVIP

景观建筑设计毕业论文参考文献（Literature review of landscape architecture design） Powder extrusion is an important means to produce compact and high performance powder metallurgy. The research and application of powder extrusion technology abroad has been very extensive, and the research in this area is relatively backward in china. Kunming University of Science and Technology has carried out a long-term research on the equipment and process of continuous extrusion and continuous cladding, and has made many breakthroughs. This paper on the basis of the combination of the excellent properties of powder of aluminum matrix composites, the cladding wire prepared by high-strength lightweight powder and wire bonding strength and good surface quality and considered the aluminum based composite materials with excellent performance, in order to obtain industrial application. According to the characteristics of powder, powder, powder forming mechanism of plastic extrusion products, strengthening mechanism of surface oxide and powder strengthen materials of powder extrusion products performance and affect the formation of. The main parameters affecting the forming performance of powder extrusion (extrusion ratio, temperature, particle size, deformation rate, die inlet shape, lubrication, etc.) and the forming process of powder coated wire are qualitatively analyzed. Based on the yield criterion and mechanical model provided by the literature, the calculation formula of the extrusion force of the powder extrusion is obtained by means of engineering method and upper bound method. Based on previous work, the mold powder wire and double metal, three metal clad material continuous extrusion simulation experiment design, and adopting the die on the forming wire and powder coating material under different process parameters were studied. This paper gives the tensile strength of the extruded products and in the process of extrusion ratio, the relationship between the content of particle reinforced m