Ubuntu13.04安装多机Grizzly版本的OpenStack.docxVIP

Ubuntu13.04安装Grizzly版OpenStack计划Control Nodeeth0 (), eth1 (32)NetworkNodeeth0 (), eth1 (33)Compute Nodeeth0 (), eth1 (34)1.Control Node1.1前期准备1.1.1 Ubuntu系统准备切换用户sudosu增加Grizzly源apt-get install -y ubuntu-cloud-keyringecho deb /ubuntu precise-updates/grizzly main /etc/apt/sources.list.d/grizzly.list升级系统：apt-get updateapt-get upgradeapt-getdist-upgrade1.1.2网络设置编辑/etc/network/interfaces#For Exposing OpenStack API over the internetauto eth0iface eth0inet staticaddress32netmask gateway dns-nameservers #Not internet connected(used for OpenStack management)auto eth1iface eth1inet staticaddressnetmask 设置好后重启网络：service networking restartUbuntu13.04桌面版不要用上面的命令重启网络，不然会卡死！可以用ifdown和ifup来启动和停止网卡1.1.3安装MySQL RabbitMQ安装MySQL：apt-get install -y mysql-server python-mysqldb配置并重启MySQL：sed -i s///g /etc/mysql/fservicemysql restart创建表：mysql -u root -p#KeystoneCREATE DATABASE keystone;GRANT ALL ON keystone.* TO keystoneUser@% IDENTIFIED BY keystonePass;#GlanceCREATE DATABASE glance;GRANT ALL ON glance.* TO glanceUser@% IDENTIFIED BY glancePass;#QuantumCREATE DATABASE quantum;GRANT ALL ON quantum.* TO quantumUser@% IDENTIFIED BY quantumPass;#NovaCREATE DATABASE nova;GRANT ALL ON nova.* TO novaUser@% IDENTIFIED BY novaPass;#CinderCREATE DATABASE cinder;GRANT ALL ON cinder.* TO cinderUser@% IDENTIFIED BY cinderPass;quit;安装RabbitMQ：apt-get install -y rabbitmq-server安装NTP：apt-get install -y ntp配置NTP：#Comment the ubuntu NTP serverssed -i s/server 0./#server 0./g /etc/ntp.confsed -i s/server 1./#server 1./g /etc/ntp.confsed -i s/server 2./#server 2./g /etc/ntp.confsed -i s/server 3./#server 3./g /etc/ntp.conf#Set the network node to follow up your conroller nodesed -i s/server /server /g /etc/ntp.confservicentp restart1.1.4其他apt-get install -y vlan bridge-utils配置/etc/sysctl.confsed -i s/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/ /etc/sysctl.confKeystone安装并检查状态：apt-get install -y keystoneservice keystone status修改/etc/keystone/keystone.conf中的数据库连接connection = mysql://keystoneUser:keystonePas