the materials science of composites课件 assignment.pdfVIP

1. Enclosed you find the figures and tables in which for three load cases, the stresses in an AS4- PEEK laminate are given. The graphs represent the stresses 1, 2 and 6 (in the laminate axis system), the stresses x, y and s (in the tables) refer to the ply axis systems. The laminate stacking sequence is (90, 45, -45, 0, 90, 0) . s A) Which external loads have been applied (not the absolute values are important, but the components). B) What is the meaning of Rint and Rdeg? C) How is it possible that for load case 3 the same 45° plays have both the lowest Rint and Rdeg? D) What is the safety factor compared to the failure strength of the laminate for load cases 2 and 3? E) Which stress component (x, y or s) is dominantly responsible for the first play failure in load cases 2 and 3? F) How can this laminate be further optimised for minimum weight? PLY STRESSES IN MPa. Ply No sigma-1 sigma-2 sigma-6 sigma-x sigma-y sigma-s 12 Top 34.35 -34.35 0.00 -34.35 34.35 0.00 12 Bot 34.35 -34.35 0.00 -34.35 34.35 0.00 11 Top -0.00 -0.00 -34.35 -34.35 34.35 -0.00 11 Bot -0.00 -0.00 -34.35 -34.35 34.35 -0.00 10 Top -0.00 -0.00 34.35 -34.35 34.35 0.00 10 Bot -0.00 -0.00 34.35 -34.35 34.35 0.00 9 Top -34.35 34.35 -0.00 -34.35 34.35 -0.00 9 Bot -34.35 34.35 -0.00 -34.35 34.35